BAL Waterproof 1C

£126.00 each

    BAL Waterproof 1C is a one coat solution that is fast, effective and easy to apply for tiling in internal wet areas.

    • One coat application
    • Suitable for showers, bathrooms, kitchens, laundry/utility rooms
    • Can be used without priming*
    • Ready mixed
    • Brush, roller or trowel
    • Tile after 2 hours
    • Typical coverage 0.8mm - 6m2
    • Typical coverage 1.6mm - 3m2
    • Colour light grey

    BAL Waterproof 1C provides a crack bridging without tape on static cracks or board joints up to 3mm. Includes Fibre Strand Technology for improved strength.

    A one-coat solution without the faff, BAL Waterproof 1C is suitable for all internal domestic and small commercial applications. Easy to apply straight out of the bucket, it provides coverage of up to 6m2 – perfect for any domestic shower, bathroom or wetroom. Provides complete protection against water ingress, giving you peace of mind that your project will last the test of time.

    * With BAL Waterproof 1C, no priming is required on most common substrates, including: Plasterboard, BAL Board (smooth side), Screeds, Concrete, BAL Rapid Mat, Plywood overlays (floors only), Cement: sand render. Priming is required on the following: Plaster, Cement boards, BAL Board (tiling side). In this instance, use one coat neat of BAL PRIMER 1C and allow to dry for 15-30 minutes before applying BAL WATERPROOF 1C.

    BAL Waterproof 1C Datasheet. Contact the Helpdesk for advice regarding your tile project.

Recently Viewed